Lenze EPM−T9XX Modular system - Manual (Page 81)

4×analog output
4
The modular system
4.17
L
4.17−1 EDSPM−TXXX−9.0−11/2009
4.17 4×analog output
The module 4×analog output has four analog outputs which can be parameterised
individually. The analog outputs are isolated with regard to the backplane bus.
)
Note!
The chapter "Parameter setting" describes how to parameterise
the module.
l 4 analog outputs
l DC 24 V supply voltage
l The outputs can be parameterised individually
l One reference potential (GND) for all outputs
l Output ranges: Voltage, current
l LED diagnostics displays a wire breakage at current output and a short
circuit at voltage output
0
1
2
epm−t015
Fig. 4.17−1 Overview of 4×analog output
0 LED for status display
1
Bit address label card
2 Plug−in terminal strip
Description
Features
Overview