Yaskawa SGDH Linear Sigma Series - Manual (Page 100)

4 SERVOPACK Specifications and Dimensional Drawings
4.1.1 Single-phase/Three-phase 200 V
4-2
4.1 SERVOPACK Ratings and Specifications
4.1.1 Single-phase/Three-phase 200 V
The value of the input power supply voltage is maximum 253 Vrms.
4.1.2 Three-phase 400 V
The value of the input power supply voltage is maximum 528 Vrms.
• Take appropriate measures to ensure that the input power supply is supplied within the specified voltage
range.
An incorrect input power supply may result in damage to the SERVOPACK. If the voltage exceeds these values, use
a step-down transformer so that the voltage will be within the specified range.
CAUTION
SERVOPACK
Model SGDH- A5A 01A 02A 04A 05A 08A 10A 15A 20A 30A 50A 75A
Max. Applicable
Servomotor
Capacity (kW) 0.05 0.1 0.2 0.4 0.45 0.75 1.0 1.5 2.0 3.0 5.0 7.5
Continuous Out-
put Current
(Arms) 0.64 0.91 2.1 2.8 3.8 5.7 7.6 11.6 18.5 24.8 32.9 54.7
Max. Output Cur-
rent (Arms) 2.0 2.8 6.5 8.5 11.0 13.9 17 28 42 56 84 130
Input
Power
Supply Main
Circuit Single-phase/Three-phase 200 to 230 VAC +10 to -15%, 50/60 Hz
Control
Circuit Single-phase 200 to 230 VAC +10 to -15%, 50/60 Hz
Configuration Base-mounted (Rack mounting available as an option) Base-mounted (Duct-
ventilated available as
an option)
Regenerative
Processing External regenerative
resistor Built-in External regenerative
resistor
SERVOPACK Model SGDH- 05D 10D 15D 20D 30D 50D 75D
Max. Applicable Servomotor
Capacity (kW) 0.45 1.0 1.5 2.0 3.0 5.0 7.5
Continuous Output Current
(Arms) 1.9 3.5 5.4 8.4 11.9 16.5 25.4
Max. Output Current (Arms) 5.5 8.5 14 20 28 40.5 65
Input Power
Supply Main Circuit Three-phase 380 to 480 VAC +10 to -15%, 50/60 Hz
Control Circuit 24 VDC ±15%
Configuration Base-mounted
(Rack mounting available as an option) Base-mounted (Duct-venti-
lated available as an option)
Regenerative Processing Built-in External regenerative resistor