Yaskawa SGDH Linear Sigma Series - Manual (Page 39)

2.3 Σ-II Series SERVOPACKs and Applicable Linear Servomotors
2-5
2
Note: The model combinations shown in this table are used when the maximum rated force of the appli-
cable linear servomotor is required. To suppress rises in temperature, larger linear servomotors are
used in some cases. If so, the SERVOPACK capacity can be lowered if using a motor at a lower
force than the rated force. Calculate the required current and select a model with a margin of
approximately 20%. An allowance can be made for up to 1/3 of the combined capacity of the linear
servomotor and SERVOPACK in the table.
SGLTW
(With T-type iron core)
22 models
20A170A − 05AE −
20A320A − 10AE −
20A460A − 15AE −
35A170A − 08AE −
35A320A − 15AE −
35A460A − 20AE −
35A170H − 08AE −
35A320H − 15AE −
50A170H − 08AE −
50A320H − 15AE −
40A400B − 20AE −
40A600B − 50AE −
80A400B − 50AE −
80A600B − 75AE −
35D170H − − 10DE
35D320H − − 20DE
50D170H − − 10DE
50D320H − − 20DE
40D400B − − 30DE
40D600B − − 50DE
80D400B − − 50DE
80D600B − − 75DE
Linear Σ Series Linear Servomotor
Σ-II Series SGDH SERVOPACK
Single-phase
200 VAC
Three-phase
200 VAC
Three-phase
400 VAC