Yaskawa SGDH Linear Sigma Series - Manual (Page 47)

2.6 Selecting Peripheral Devices
2-13
2
2.6.4 Regenerative Resistors
* 1. For the optional JUSP-RA05 Regenerative Resistor Unit.
* 2. For the optional JUSP-RA18 Regenerative Resistor Unit.
Note: 1. If the SERVOPACK cannot process the regenerative power, an external regenerative resistor is
required. Refer to 6.8.5 External Regenerative Resistor, 6.8.6 Regenerative Resistor, and 7.6
Connecting Regenerative Resistors.
2. The following table shows the manufacturers of each device.
Main Circuit
Power Supply
SERVOPACK Model
Regenerative Resistor
(Refer to 6.8.5, 6.8.6, and 7.6.)
Capacity
(kW)
SGDH-
Built-in
Externally
connected
Resistance
( Ω)
Capacity
(W)
Single-phase
200 V
0.05 A5AE
− − −
0.10 01AE
0.20 02AE
0.40 04AE
Three-phase
200 V
0.45 05AE
50 60
−
0.75 08AE
1.0 10AE
1.5 15AE 30 70
2.0 20AE 25 140
3.0 30AE 12.5 140
5.0 50AE 8 280
7.5 75AE (3.13)
∗1
(1760)
∗1 JUSP-RA05
Three-phase
400 V
0.45 05DE
108 70
−
1.0 10DE
1.5 15DE
2.0 20DE
45 140
3.0 30DE
5.0 50DE 32 180
(18)
∗2
(880)
∗2 JUSP-RA18 7.5 75DE
Peripheral Device Manufacturer
External Regenerative Resistor Iwaki Wireless Research Institute
External Regenerative Unit Yaskawa Electric Corporation