Yaskawa SGDH Linear Sigma Series - Manual (Page 147)

6.8 Peripheral Devices
6-19
6
(3) Other Types of the Applicable Connection Cables: JZSP-CMS00-†
The following cable is applicable for Sigma II..
6.8.3 Cables for Analog Monitor
(1) Cable Type: JZSP-CA01 or DE9404559
Connect the specified cables to CN5 connector for monitoring the analog monitor signals. For details, refer to
10.5 Analog Monitor.
(2) Dimensional Drawing
* Manufactured by Hirose Electric Corporation.
(3) Specifications
Note: The above monitoring items are the factory settings. The monitoring items can be changed by set-
ting the parameter Pn003. Refer to 10.5 Analog Monitor .
Cable Type Cable Length
(L)
JZSP-CMS00-1 1 m (3.28 ft)
L
2
10
1
9
8
11
1
7
Digital Operator end
Units: mm (in)
SERVOPACK end
17.3 (5.27)
29.5
(8.99)
20.2 (6.16)
30 (9.14) 39 (11.89)
CN5
Cable for Analog Monitor
CHARGE
MODE/SET DATA/
POWER
With the front cover open
3 4
1 2
Socket: DF11-4DS-2C∗
Connector: DF11-2428SCF∗
1000 mm (39.37 in)
-0
+20
White
Red
Black
Black
Viewed from the cable
-0
+0.79
Pin No. Cable Color Signal Monitoring Item
1 Red Analog Monitor 2 Motor speed: 1V/1000 mm/s
2 White Analog Monitor 1 Force reference: 1V/100% rated force
3 and 4 Black (2 cables) GND (0 V) −