Yaskawa SGDH Linear Sigma Series - Manual (Page 407)

12.4 List of Parameters
12-31
12
* Available for the software version 32 or later
Parameter
No.
Name Setting Range Unit
Factory
Setting
Setting
Validation
Reference
Section
Pn217 Reference Pulse Input Multiplication * 1 to 99 × 1 1 Immedi-
ately
−
Pn218 Reference Pulse Input Multiplication
Function Selection * − − 0000 After
restart
−
Pn280 Linear Scale Pitch 0 to 65535 1 μm 0 After
restart
9.2.2
9.2.3
9.7.7
9.8.2
Pn281 PG Divider 1 to 255 1P/(scale
pitch)
20 After
restart
9.7.7
Pn300 Speed Reference Input Gain 150 to 3000 0.01V
/ rated
speed
600 Immeci-
ately
9.7.1
9.9.4
Pn305 Soft Start Acceleration Time 0 to 10000 1 ms 0 Immedi-
ately
9.7.4
Pn306 Soft Start Deceleration Time 0 to 10000 1 ms 0 Immedi-
ately
9.7.4
Pn307 Speed Reference Filter Time Constant 0 to 65535 0.01 ms 40 Immedi-
ately
9.7.5
Pn308 Speed Feedback Filter Time Constant 0 to 65535 0.01 ms 0 Immedi-
ately
10.4.7
Pn380 Internal Set Speed 1 0 to 5000 1 mm/s 10 Immedi-
ately
9.10.1
Pn381 Internal Set Speed 2 0 to 5000 1 mm/s 20 Immedi-
ately
9.10.1
Pn382 Internal Set Speed 3 0 to 5000 1 mm/s 30 Immedi-
ately
9.10.1
Pn383 JOG Speed 0 to 5000 1 mm/s 50 Immedi-
ately
−
Pn384 Motor Maximum Speed * 1 to 100 0.1 m/s 50 After
restart
9.6.6
Pn400 Force Reference Input Gain 10 to 100 0.1 V/
rated force
30 Immedi-
ately
9.9.1
9.9.2
10.4.2
Pn401 Force Reference Filter Time Constant 0 to 65535 0.01 ms 100 Immedi-
ately
10.4.10
Pn404 Forward External Force Limit 0 to 800 1% 100 Immedi-
ately
9.11.2
9.11.4
Pn405 Reverse External Force Limit 0 to 800 1% 100 Immedi-
ately
−
0
1
Disabled
Enabled
Reference Pulse Multiplication Function Selection
∗
4th
digit
3rd
digit
2nd
digit
1st
digit
n.
Reserved (Do not change)
Reserved (Do not change)
Reserved (Do not change)