PLANET XGS3-24042 - Manual (Page 107)

11-4
lldp neighbors max-num < value >
no lldp neighbors max-num
Configure the size of space to store
Remote Table of the port as the
specified value or default value.
11. Configure the type of operation when the Remote Table of the port is full
Command Explanation
Port Configuration Mode
lldp tooManyNeighbors {discard|
delete}
Configure the type of operation when the
Remote Table of the port is full.
12. Display and debug the relative information of LLDP
Command Explanation
Admin, Global Mode
show lldp
Display the current LLDP configuration
information.
show lldp interface ethernet <IFNAME>
Display the LLDP configuration information of
the current port.
show lldp traffic Display the information of all kinds of counters.
show lldp neighbors interface
ethernet < IFNAME >
Display the information of LLDP neighbors
of the current port.
show debugging lldp Display all ports with LLDP debug enabled.
Admin Mode
debug lldp
no debug lldp
Enable or disable the DEBUG switch.
debug lldp packets interface ethernet
<IFNAME>
no debug lldp packets interface ethernet
<IFNAME>
Enable or disable the DEBUG packet-receiving
and sending function in port or global mode.
Port configuration mode
clear lldp remote-table Clear Remote-table of the port.