PLANET XGS3-24042 - Manual (Page 574)

62-18
Command Explanation
Global Mode
savi enable
no savi enable
Enable the global SAVI function, no
command disables the function.
2. Enable or disable application scene function for SAVI
Command Explanation
Global Mode
savi ipv6 {dhcp-only | slaac-only |
dhcp-slaac} enable
no savi ipv6 {dhcp-only | slaac-only |
dhcp-slaac} enable
Enable the application scene function for
SAVI, no command disables the function.
3. Configure SAVI binding function
Command Explanation
Global Mode
savi ipv6 check source binding ip
<ip-address> mac <mac-address>
interface <if-name> {type [slaac | dhcp]
lifetime <lifetime> | type static}
no savi ipv6 check source binding ip
<ip-address> interface <if-name>
Configure a static or dynamic binding
manually, no command deletes the
configured binding. This command may
be configured in a global function of savi
enable, slaac-only enable, dhcp-only
enable or dhcp-slaac enable.
4. Configure the global max-dad-delay for SAVI
Command Explanation
Global Mode
savi max-dad-delay <max-dad-delay>
no savi max-dad-delay
Configure the max lifetime period of SAVI
binding at DETECTION state, no
command restores the default value.
5. Configure the global max-dad-prepare-delay for SAVI
Command Explanation
Global Mode
savi max-dad-prepare-delay
<max-dad-prepare-delay>
no savi max-dad-prepare-delay
Configure the max redetection lifetime
period for SAVI binding, no command
restores the default value.