PLANET XGS3-24042 - Manual (Page 509)

51-18
[no] periodic
{{Monday+Tuesday+Wednesday+Thursday+
Friday+Saturday+Sunday} | daily | weekdays |
weekend} <start_time> to <end_time>
（3）Configure absolute time range
Command Explanation
Global Mode
absolute start <start_time> <start_data> [end
<end_time> <end_data>]
Configure absolute time
range.
[no] absolute start <start_time> <start_data> [end
<end_time> <end_data>]
Stop the function of the time
range.
4. Bind access-list to a specific direction of the specified port.
Command Explanation
Physical Port Mode, VLAN Port Mode
{ip|ipv6|mac|mac-ip} access-group <acl-name>
{in|out} [traffic-statistic]
no {ip|ipv6|mac|mac-ip} access-group <acl-name>
{in|out}
Apply an access-list to the
ingress or egress direction
on the port; the no command
deletes the access-list
bound to the port.
5. Clear the filtering information of the specified port
Command Explanation
Admin Mode
clear access-group statistic interface
{ <interface-name> | ethernet <interface-name> }
Clear the filtering information
of the specified port.
51.3 ACL Example
Scenario 1:
The user has the following configuration requirement: port 1/0/10 of the switch connects to 10.0.0.0/24
segment, ftp is not desired for the user.
Configuration description:
1． Create a proper ACL
2． Configuring packet filtering function