PLANET XGS3-24042 - Manual (Page 419)

48-18
48.4.4.2 Configuration of MSDP parameters
Commands Explanation
MSDP Peer Configuration Mode
connect-source <interface-type>
<interface-number>
no connect-source
To configure the Connect-Source interface for
MSDP Peer. The no form of this command will
remove the configured Connect-Source
interface.
description <text>
no description
To configure the descriptive information about
the MSDP entities. The no form of this
command will remove the configured
description.
remote-as <as-num>
no remote-as <as-num>
To configure the AS number for MSDP Peer.
The no form of this command will remove the
configured AS number of MSDP Peer.
mesh-group <name>
no mesh-group <name>
To configure an MSDP Peer to join the
specified mesh group. The no form of this
command will remove the MSDP Peer from
the specified mesh group.
48.4.5 Configuration of Delivery of MSDP Packet
Commands Explanation
MSDP Configuration Mode
redistribute [list <acl-list-number
|acl-name>]
no redistribute
To configure the filter rules for creation of SA
packets.
The no form of this command will remove the
configured.
MSDP Configuration Mode or MSDP Peer
Configuration Mode
sa-filter（in|out）[ list <acl-number |
acl-name> | rp-list <rp-acl-number |
rp-acl-name>]
no sa-filter（in|out）[[ list <acl-number |
acl-name> | rp-list <rp-acl-number |
rp-acl-name>]
To configure the filter rules for receiving and
forwarding SA packets.
The no form of this command will remove the
configured rules.
MSDP Peer Configuration Mode
sa-request
no sa-request
To configure sending of SA request packets.
The no form of this command will disable
sending of SA request packets.
MSDP Configuration Mode
sa-request-filter [list <access-list-number |
access-list-name>]
To configure filter rules for receiving SA
request packets. The no form of this