PLANET XGS3-24042 - Manual (Page 485)

49-29
mrouter-port interface <interface –name>
ipv6 mld snooping vlan <vlan-id>
mrouter-port learnpim6
no ipv6 mld snooping vlan <vlan-id>
mrouter-port learnpim6
Enable the function that the specified VLAN
learns mrouter-port (according to pimv6
packets), the no command will disable the
function.
ipv6 mld snooping vlan <vlan-id> mrpt
<value>
no ipv6 mld snooping vlan <vlan-id> mrpt
Configure the keep-alive time of the mrouter
port. The “no” form of this command
restores to the default.
ipv6 mld snooping vlan <vlan-id>
query-interval <value>
no ipv6 mld snooping vlan <vlan-id>
query-interval
Configure the query interval. The “no” form
of this command restores to the default.
ipv6 mld snooping vlan <vlan-id>
immediate-leave
no ipv6 mld snooping vlan <vlan-id>
immediate-leave
Configure immediate leave multicast group
function for the MLD Snooping of specific
VLAN. The “no” form of this command
cancels the immediate leave configuration.
ipv6 mld snooping vlan <vlan-id>
query-mrsp <value>
no ipv6 mld snooping vlan <vlan-id>
query-mrsp
Configure the query maximum response
period. The “no” form of this command
restores to the default.
ipv6 mld snooping vlan <vlan-id>
query-robustness <value>
no ipv6 mld snooping vlan <vlan-id>
query-robustness
Configure the query robustness, the “no”
form of this command restores to the
default.
ipv6 mld snooping vlan <vlan-id>
suppression-query-time <value>
no ipv6 mld snooping vlan <vlan-id>
suppression-query-time
Configure the suppression query time. The
“no” form of this command restores to the
default
ipv6 mld snooping vlan <vlan-id>
static-group <X:X::X:X> [source <X:X::X:X>]
interface [ethernet | port-channel]
<IFNAME>
no ipv6 mld snooping vlan <vlan-id>
static-group <X:X::X:X> [source <X:X::X:X>]
interface [ethernet | port-channel]
<IFNAME>
Configure static-group on specified port of
the VLAN. The no form of the command
cancels this configuration.
49.7.3 MLD Snooping Examples