PLANET XGS3-24042 - Manual (Page 342)

40-8
BGP configuration mode
neighbor { <ip-address> | <TAG> } route-map
<map-name > {in | out}
no neighbor { <ip-address> | <TAG> }
route-map <map-name > {in | out}
Apply a route map to incoming or
outgoing routes; the no neighbor
{ <ip-address> | <TAG> }
route-map <map-name > {in |
out} command cancels the
settings of routing maps.
2．Configure Route Aggregation
Command Explanation
BGP configuration mode
aggregate-address <ip-address/M>
[summary-only] [as-set]
no aggregate-address <ip-address/M>
[summary-only] [as-set]
Create an aggregate entry in the
BGP routing table; the no
aggregate-address
<ip-address/M> [summary-only]
[as-set] command cancels the
aggregate entry.
3．Configure BGP Community Filtering
Command Explanation
BGP configuration mode
neighbor {<ip-address> | <TAG>}
send-community
no neighbor {<ip-address> | <TAG>}
send-community
Allow the routing updates with
community attributes sending to
BGP neighbors; the no neighbor
{<ip-address> | <TAG>}
send-community command
enables the route without
community attributes.
4．Configure BGP Confederation
Command Explanation
BGP configuration mode
bgp confederation identifier <as-id>
no bgp confederation identifier <as-id>
Configure a BGP AS
confederation identifier; the
no bgp confederation
identifier <as-id> command
deletes the BGP AS
confederation identifier.
bgp confederation peers <as-id> [<as-id>..]
no bgp confederation peers <as-id> [<as-id>..]
Configure the AS affiliated to the
AS confederation; the no bgp
confederation peers <as-id>