PLANET XGS3-24042 - Manual (Page 32)

2-3
■ 10/100/1000Base-T and SFP interfaces
LED Color Function
LNK/ACT
Red
Lights to indicate the link through that port is successfully established with
speed 100Mbps
Blink to indicate that the switch is actively sending or receiving data over that
port.
Green
Lights to indicate the link through that port is successfully established with
speed 1000Mbps
Blink to indicate that the switch is actively sending or receiving data over that
port.
Off No flow go through the port
XGS3-24242 LED indication
Figure 2-1-4 XGS3-24242 LED panel
■ System
LED Color Function
PWR
Green Lights to indicate that the Switch has power.
Off Power is off.
SYS Green
Light to indicate that the system is operating normally.
Blink to indicate that the system is loading.
ALM
Green System is malfunctioning
Off System is operating normally
RPS
Green Redundancy power unit is using
Off Redundancy power unit is off
M1-1 / M2-1
Green
Lights to indicate the 10G port is at link state
Blink to indicate 10G port is receiving or sending the data
Off 10G port is not at link state
M1-2 / M2-2
Green
Lights to indicate the 10G port is at link state
Blink to indicate 10G port is receiving or sending the data
Orange 10G port is not at link state, but transceiver is in place
Off 10G port is not at link state