PLANET XGS3-24042 - Manual (Page 553)

57-9
2. Configure/delete port number by SSL used
Command Explanation
Global Mode
ip http secure-port <port-number>
no ip http secure-port
Configure port number by SSL used, the“no
ip http secure-port” command deletes the
port number.
3. Configure/delete secure cipher suite by SSL used
Command Explanation
Global Mode
ip http secure-ciphersuite
{des-cbc3-sha|rc4-128-sha|
des-cbc-sha}
no ip http secure-ciphersuite
Configure/delete secure cipher suite by SSL
used.
4. Maintenance and diagnose for the SSL function
Command Explanation
Admin Mode or Configuration Mode
show ip http secure-server status Show the configured SSL information.
debug ssl
no debug ssl
Open/close the DEBUG for SSL function.
57.3 SSL Typical Example
When the Web function is enabled on the switch, SSL can be configured for users to access the web interface
on the switch. If the SSL has been configured, communication between the client and the switch will be
encrypted through SSL for safety.
Firstly, SSL should be enabled on the switch. When the client tries to access the switch through https method,
a SSL session will be set up between the switch and the client. When the SSL session has been set up, all the
data transmission in the application layer will be encrypted.