PLANET XGS3-24042 - Manual (Page 214)

23-51
SWITCHB configuration task sequence:
Switch B(config)# anti-arpscan enable
SwitchB(config)#interface ethernet1/0/1
SwitchB (Config-If-Ethernet 1/0/1)#anti-arpscan trust port
SwitchB (Config-If-Ethernet 1/0/1)exit
23.4 ARP Scanning Prevention Troubleshooting Help
 ARP scanning prevention is disabled by default. After enabling ARP scanning prevention, users can
enable the debug switch, “debug anti-arpscan”, to view debug information.