4 vlan-acl troubleshooting, Vlan-acl, Roubleshooting – PLANET XGS3-24042 User Manual

Page 560

Advertising
background image

59-4

Switch(config-ip-ext-nacl-vacl_a)# deny ip any-source any-destination time-range t1

3)

Configure the extended acl_b of IP, at any time it only allows to access resource within the internal

network (such as 192.168.1.255).

Switch(config)#ip access-list extended vacl_b

Switch(config-ip-ext-nacl-vacl_a)# permit ip any-source 192.168.1.0 0.0.0.255

Switch(config-ip-ext-nacl-vacl_a)# deny ip any-source any-destination

4)

Apply the configuration to VLAN

Switch(config)#vacl ip access-group vacl_a in vlan 1

Switch(config)#vacl ip access-group vacl_b in vlan 2

59.4 VLAN-ACL Troubleshooting

When VLAN ACL and Port ACL are configured at the same time, the principle of denying firstly is used.

When the packets match VLAN ACL and Port ACL at the same time, as long as one rule is drop, then the

final action is drop.

Each ACL of different types can only apply one on a VLAN, such as the basic IP ACL, each VLAN can

applies one only.

Advertising
This manual is related to the following products: