PLANET XGS3-24042 User Manual
Page 681
81-35
1. Enable globally MPLS (necessary)
2. Configure VPN instances (necessary)
(1) Create VPN instances, and enter the VPN instance view.
(2) RD Configure the VPN instance RD
(3) Configure the VPN instance RT
(4) Configure the VPN instance to relate with the interface
3. Configure basic MPLS VPN (necessary)
(1) Configure to use EBGP between PE-CE
1)
Configure the remote PE as the public network VPNv4 neighbor
2)
Enter the BGP-VPN instance view
3)
Configure CE as the VPN private network neighbor
4)
Advertise local private network routes
(2) Configure to use EBGP between PE-CE
1)
Configure the remote PE as the public network VPNv4 neighbor
2)
Create the OSPF instance between PE-CE, and enter the Router OSPF view.
3)
Enable OSPF in the segment between PE-CE
4)
Configure to re-advertise BGP routes
5)
Enter the BGP-VPN instance view
6)
Configure to re-advertise OSPF routes
7)
Advertise local private network routes
(3) RIP Configure to use EBGP between PE-CE
1)
Configure the remote PE as the public network VPNv4 neighbor
2)
Enter the RIP VPN instance view
3)
Enable RIP in the segment between PE-CE
4)
Configure to re-advertise BGP routes
5)
Enter the BGP-VPN instance view
6)
Configure to re-advertise RIP routes
7)
Advertise local private network routes
(4) Configure to use static routes between PE-CE
1)
Configure the remote PE as the public network VPNv4 neighbor
2)
Configure static VPN routes
3)
Enter the BGP-VPN instance view
4)
Configure to re-advertise static routes
5)
Advertise local private network routes
1. Enable MPLS (necessary)
Command
Explanation
Global Configuration Mode