PLANET XGS3-24042 User Manual
Page 448
48-47
ip igmp snooping vlan <vlan-id>
no ip igmp snooping vlan <vlan-id>
Enables IGMP Snooping for specified VLAN.
The no operation disables IGMP Snooping for
specified VLAN.
ip igmp snooping proxy
no ip igmp snooping proxy
Enable IGMP Snooping proxy function, the no
command disables the function.
ip igmp snooping vlan < vlan-id > limit
{group <g_limit> | source <s_limit>}
no ip igmp snooping vlan < vlan-id > limit
Configure the max group count of vlan and
the max source count of every group. The “no
ip igmp snooping vlan <vlan-id> limit”
command cancels this configuration.
ip igmp snooping vlan <vlan-id>
l2-general-querier
no ip igmp snooping vlan <vlan-id>
l2-general-querier
Set this vlan to layer 2 general querier. It is
recommended to configure a layer 2 general
querier on a segment. The “no ip igmp
snooping vlan <vlan-id>
l2-general-querier”command cancels this
configuration.
ip igmp snooping vlan <vlan-id>
l2-general-querier-version <version>
Configure the version number of a general
query from a layer 2 general querier.
ip igmp snooping vlan <vlan-id>
l2-general-querier-source <source>
Configure the source address of a general
query from a layer 2 general querier.
ip igmp snooping vlan <vlan-id>
mrouter-port interface <interface –name>
no ip igmp snooping vlan <vlan-id>
mrouter-port interface <interface –name>
Configure static mrouter port of vlan. The no
form of the command cancels this
configuration.
ip igmp snooping vlan <vlan-id>
mrouter-port learnpim
no ip igmp snooping vlan <vlan-id>
mrouter-port learnpim
Enable the function that the specified VLAN
learns mrouter-port (according to pim
packets), the no command will disable the
function.
ip igmp snooping vlan <vlan-id> mrpt
<value >
no ip igmp snooping vlan <vlan-id> mrpt
Configure this survive time of mrouter port.
The “no ip igmp snooping vlan <vlan-id>
mrpt” command restores the default value.
ip igmp snooping vlan <vlan-id>
query-interval <value>
no ip igmp snooping vlan <vlan-id>
query-interval
Configure this query interval. The “no ip igmp
snooping vlan <vlan-id> query-interval”
command restores the default value.
ip igmp snooping vlan <vlan-id>
immediately-leave
no ip igmp snooping vlan <vlan-id>
immediately-leave
Enable the IGMP fast leave function for the
specified VLAN: the “no ip igmp snooping
vlan <vlan-id> immediate-leave” command
disables the IGMP fast leave function.
ip igmp snooping vlan <vlan-id>
Configure the maximum query response