PLANET XGS3-24042 - Manual (Page 537)

53-4
show nd-dynamic count {vlan
<vlan-id> | interface ethernet
<portName> }
Display the number of dynamic
NEIGHBOUR in corresponding ports and
VLAN.
debug switchport mac count
no debug switchport mac count
All kinds of debug information when
limiting the number of MAC on ports.
debug switchport arp count
no debug switchport arp count
All kinds of debug information when
limiting the number of ARP on ports.
debug switchport nd count
no debug switchport nd count
All kinds of debug information when
limiting the number of NEIGHBOUR on
ports.
debug vlan mac count
no debug vlan mac count
All kinds of debug information when
limiting the number of MAC in VLAN.
debug ip arp count
no debug ip arp count
All kinds of debug information when
limiting the number of ARP in VLAN.
debug ipv6 nd count
no debug ipv6 nd count
All kinds of debug information when
limiting the number of MAC in VLAN.
53.3 The Number Limitation Function of Port, MAC in VLAN and
IP Typical Examples
Figure 53-1 The Number Limitation of Port, MAC in VLAN and IP Typical Configuration Example
In the network topology above, SWITCH B connects to many PC users, before enabling the number limitation
function of MAC and IP in Port, VLAN, if the system hardware has no other limitation, SWTICH A and
SWITCH A
SWITCH B
PC PC PC PC PC
………