PLANET XGS3-24042 - Manual (Page 668)

80-22
[no] request-retry
optional
Configure the LDP to retry 5 times when
the label request is rejected, the no
operation will disable the retry.
[no] request-retry-timeout <time-val>
optional
Configure the retry interval, whose default
value is 5 second, the no operation will
restore the default value.
[no] targeted-peer-Hello-receipt
optional
Configure LDP to receive HELLOs from
specified targets, even the targeted peer is
not configured on the host. Not receiving
such HELLOs is the default setting. The no
operation will restore the default
configuration. Please notice that, if
targeted LDP peers are configured,
targeted-peer-Hello-receipt should be too.
4. Clear the LDP connections or adjacencies
Command Explanation
Admin Mode
clear ldp adjacency {<ip-addr>|*}
Optional
Clear specified LDP adjacencies, “ * ”
means all.
clear ldp session {<ip-addr>|*}
optional
Clear specified LDP sessions, “*”means all.
80.3 LDP Typical Instances
Some designations of LDP are for adapting different network environments. Its configuration is very simple in
the typical Ethernet environment. Due to the development of hardware system, especially the popularity of L3
switches, the pure MPLS network has already lost its importance to MPLS VPN.