4 examples 4: configure bgp confederation, 4 examples 4: configure bgp confederation -19 – PLANET XGS3-24042 User Manual

Page 353

Advertising
background image

40-19

Switch(config)#ip community-list com2 permit 90

Switch(config)#exit

Switch#clear ip bgp 16.1.1.6 soft out

40.3.4 Examples 4: configure BGP confederation

The following is the configuration of an AS. As the picture illustrated, SwitchB and SwitchC establish IBGP

connection. SwitchD is affiliated to AS 20.SwitchB and SwitchC establish EBGP of inner AS confederation.

AS10 and AS20 form AS confederation with the AS number AS200; SwitchA belongs to AS100, SwitchB may

create EBGP connection by AS200.

Figure 40-2 Confederation configuring topology

The configurations are as following:

SwitchA:

SwitchA(config)#router bgp 100

SwitchA(config-router-bgp)#neighbor 11.1.1.2 remote-as 200

SwitchB:

AS200

AS10

AS20

AS100

vlan1:11.1.1.1

AS300

vlan1:11.1.1.2

Vlan2:13.1.1.2

vlan3:12.1.1.2

vlan1:12.1.1.3

vlan1:13.1.1.4

SwitchA

SwitchB

SwitchC

SwitchD

Advertising
This manual is related to the following products: