PLANET XGS3-24042 - Manual (Page 373)

43-7
ip route <ipv4-address/mask>
tunnel <ID>
no ip route <ipv4-address/mask>
tunnel <ID>
Configure the egress interface of the IPv4 static
route to GRE tunnel.
ipv6 route <ipv6-address/prefix>
tunnel <ID>
no ipv6 route
<ipv6-address/prefix> tunnel <ID>
Configure the egress interface of the IPv6 static
route to GRE tunnel.
43.3 Example of GRE Tunnel
The Typical Example of GRE Tunnel:
Figure 43-1 the typical network of IPv4 over IPv6 GRE tunnel character
Configuration summary:
 Configure IPv6 network, and ensure IPv6 connectivity.
 Configure the tunnel interface, and the interface that connect PC.
 Configure the tunnel parameters and enable the tunnel interface.
 Enable OSPF route protocol to forward the data between PC1 and PC2 through the tunnel.
2000:3000:1000::1/64
Interface e1/0/11
2005:3000:1000::2/64
Interface e1/0/12
2000:3000:1000::2/64
Interface e1/0/11
Switch C
V11 V12
2005:3000:1000::1/64
Interface e1/0/12
GRE tunnel Switch A Switch B
Tunnel1
100.1.1.1/24
Tunnel 1
100.1.1.2/24 10.1.1.2/24
Interface e1/0/10
20.1.1.2/24
Interface e1/0/10
V10 V20
10.1.1.1/24 20.1.1.1/24
PC1 PC2