PLANET XGS3-24042 - Manual (Page 562)

60-6
mac-authentication-bypass enable
no mac-authentication-bypass enable
Enable the port MAB authentication
function.
2. Configure MAB authentication username and password
Command Explanation
Global Mode
mac-authentication-bypass
username-format {mac-address | {fixed
username WORD password WORD}}
Set the authentication mode of MAB
authentication function.
3. Configure MAB parameters
Command Explanation
Port Mode
mac-authentication-bypass guest-vlan
<1-4094>
no mac-authentication-bypass guest-vlan
Set guset vlan of MAB authentication,
only Hybrid port uses this command, it is
not take effect on access port.
mac-authentication-bypass binding-limit
<1-100>
no mac-authentication-bypass
binding-limit
Set the max MAB binding-limit of the
port.
Global Mode
mac-authentication-bypass timeout
reauth-period <1-3600>
no mac-authentication-bypass timeout
reauth-period
Set the reauthentication interval after the
authentication is unsuccessful.
mac-authentication-bypass timeout
offline-detect （0｜<60-7200>）
no mac-authentication-bypass timeout
offline-detect
Set offline detection interval.
mac-authentication-bypass timeout
quiet-period <1-60>
no mac-authentication-bypass timeout
quiet-period
Set quiet-period of MAB authentication.
mac-authentication-bypass timeout
stale-period <0-60>
no mac-authentication-bypass timeout
stale-period
Set the time that delete the binding after
the port is down.