PLANET XGS3-24042 - Manual (Page 126)

15-3
3. Assigning Switch ports for VLAN
Command Explanation
VLAN Mode
switchport interface <interface-list>
no switchport interface <interface-list>
Assign Switch ports to VLAN.
4. Set the Switch Port Type
Command Explanation
Port Mode
switchport mode {trunk | access | hybrid}
Set the current port as Trunk, Access
Hybrid port.
5. Set Trunk port
Command Explanation
Port Mode
switchport trunk allowed vlan {WORD | all
| add WORD | except WORD|remove
WORD}
no switchport trunk allowed vlan
Set/delete VLAN allowed to be crossed
by Trunk. The “no” command restores
the default setting.
switchport trunk native vlan <vlan-id>
no switchport trunk native vlan
Set/delete PVID for Trunk port.
6. Set Access port
Command Explanation
Port Mode
switchport access vlan <vlan-id>
no switchport access vlan
Add the current port to the specified
VLAN. The “no” command restores the
default setting.
7. Set Hybrid port
Command Explanation
Port Mode
switchport hybrid allowed vlan {WORD |
all | add WORD | except WORD|remove
WORD} {tag|untag}
no switchport hybrid allowed vlan
Set/delete the VLAN which is allowed by
Hybrid port with tag or untag mode.
switchport hybrid native vlan <vlan-id>
no switchport hybrid native vlan
Set/delete PVID of the port.