PLANET XGS3-24042 - Manual (Page 137)

15-14
15.4 VLAN-translation Configuration
15.4.1 Introduction to VLAN-translation
VLAN translation, as one can tell from the name, which translates the original VLAN ID to new VLAN ID
according to the user requirements so to exchange data across different VLANs. VLAN translation is
classified to ingress translation and egress translation, this switch only supports switchover of ingress for
VLAN ID.
Application and configuration of VLAN translation will be explained in detail in this section.
15.4.2 VLAN-translation Configuration
Configuration task sequence of VLAN-translation:
1. Configure the VLAN-translation function on the port
2. Configure the VLAN-translation relations on the port
3. Configure whether the packet is dropped when checking VLAN-translation is failing
4. Show the related configuration of vlan-translation
1. Configure the VLAN-translation of the port
Command Explanation
Port mode
vlan-translation enable
no vlan-translation enable
Enter/exit the port VLAN-translation
mode.
2. Configure the VLAN-translation relation of the port
Command Explanation
Port mode
vlan-translation <old-vlan-id> to
<new-vlan-id> {in|out}
no vlan-translation old-vlan-id {in|out}
Add/delete a VLAN-translation relation.
3. Configure whether the packet is dropped when checking VLAN-translation is failing
Command Explanation
Port mode
vlan-translation miss drop in
no vlan-translation miss drop in
Configure the VLAN-translation packet
dropped on port if there is any failure.
4. Show the related configuration of vlan-translation