PLANET XGS3-24042 - Manual (Page 349)

40-15
route-server-client
no neighbor {<ip-address>|<TAG>}
route-server-client
under EBGP environment to reduce the
number of peers that every client has
configured; format “no” of the command
configures this router as route server and
specify the clients it serves, the no
neighbor {<ip-address>|<TAG>}
route-server-client command can delete
clients.
17． Configure Path-selected rules
Command Explanation
BGP configuration mode
bgp always-compare-med
no bgp always-compare-med
bgp bestpath as-path ignore
no bgp bestpath as-path ignore
bgp bestpath compare-confed-aspath
no bgp bestpath
compare-confed-aspath
bgp bestpath compare-routerid
no bgp bestpath compare-routerid
bgp bestpath med {[confed]
[missing-is-worst]}
no bgp bestpath med {[confed]
[missing-is-worst]}
BGP may change some path-select rules by
configuration to change the best selection
and compare MED under EBGP
environment through these command,
ignore the AS-PATH length, compare the
confederation as-path length, compare the
route identifier and compare the
confederation MED etc. Its format “no”
recovers the default route path-selected
rules.
18. Configure redistribution of OSPF routing to BGP
(1) Enable redistribution of OSPF routing to BGP
Command Explanation
Router BGP Configuration Mode
redistribute ospf [<process-id>]
[route-map<word>]
no redistribute ospf [<process-id>]
To enable or disable the redistribution of
OSPF routing to BGP.
(2)Display and debug the information about configuration of redistribution of OSPF routing to BGP
Command Explanation
Admin Mode and Configuration Mode
show ip bgp redistribute
To enable or disable the redistribution of
OSPF routing to BGP.
Admin Mode
debug bgp redistribute message send To enable or disable debugging messages