PLANET XGS3-24042 User Manual
Page 345
40-11
advertisement-interval
<TAG>} advertisement-interval
command recovers the default
value.
neighbor {<ip-address> | <TAG>} ebgp-multihop
[<1-255>]
no neighbor {<ip-address> | <TAG>}
ebgp-multihop
Configure the allowance of EBGP
connections with networks
connected indirectly; the no
neighbor {<ip-address> | <TAG>}
ebgp-multihop command cancels
this setting.
neighbor { <ip-address> | <TAG> } weight
<weight>
no neighbor { <ip-address> | <TAG> } weight
Configure BGP neighbor weights;
the no neighbor { <ip-address> |
<TAG>
} weight
command
recovers the default weights.
neighbor { <ip-address> | <TAG> } distribute-list
{ <access-list-number> | <name> } { in | out }
no neighbor { <ip-address> | <TAG> }
distribute-list { <access-list-number> | <name> }
{ in | out }
Filter neighbor route update; the no
neighbor { <ip-address> |
<TAG>
} distribute-list
{
<access-list-number>
|
<name> } { in | out } command
cancels route filtering.
neighbor { <ip-address> | <TAG> }
route-reflector-client
no neighbor { <ip-address> | <TAG> }
route-reflector-client
Configure the current switch as
route reflector and specify a client;
the no neighbor { <ip-address> |
<TAG>
} route-reflector-client
command deletes a client.
neighbor { <ip-address> | <TAG> } next-hop-self
no neighbor { <ip-address> | <TAG> }
next-hop-self
When sending route, configure
Next-Hop as its address; the no
neighbor { <ip-address> |
<TAG> } next-hop-self command
cancels the setting.
neighbor { <ip-address> | <TAG> } version
<value>
no neighbor { <ip-address> | <TAG> } version
Specify the BGP version
communicating with BGP
neighbors; the
no neighbor
{ <ip-address> | <TAG> } version
command recovers default setting.
neighbor { <ip-address> | <TAG> } route-map
<map-name> {in | out}
no neighbor { <ip-address> | <TAG> } route-map
<map-name> {in | out}
Apply a route map to incoming or
outgoing routes; the no neighbor
{
<ip-address> | <TAG>
}
route-map <map-name> {in | out}
command cancels the setting of