PLANET XGS3-24042 - Manual (Page 204)

22-41
no login
!
end
Switch2#show run
interface Vlan2
ipv6 address 2002::2/64
!
interface Vlan3
ipv6 address 2003::1/64
!
interface Loopback
mtu 3924
!
ipv6 route 2001::/64 2002::1
!
no login
!
End
Example 2:
Figure 22 -3 IPv6 tunnel
This case is IPv6 tunnel with the following user configuration requirements: SwitchA and SwitchB are tunnel
nodes, dual-stack is supported. SwitchC only runs IPv4, PC-A and PC-B communicate.
Configuration Description:
1. Configure two vlans on SwitchA, namely, VLAN1 and VLAN2. VLAN1 is IPv6 domain, VLAN2
connects to IPv4 domain.
2. Configure IPv6 address 2002:caca:ca01:2::1/64 in VLAN1 of SwitchA and turn on RA function,
configure IPv4 address 202.202.202.1 in VLAN2.
SwitchB SwithA
SwitchC
PC-A PC-B