PLANET XGS3-24042 - Manual (Page 256)

32-10
ipv6 dhcp snooping subscriber-id select
(sp | sv | pv | spv) delimiter WORD
(delimiter WORD |)
no ipv6 dhcp snooping subscriber-id
select delimiter
Configures user configuration options to
generate subscriber-id, no command
restores to its original default configuration,
i.e. enterprise number together with vlan
MAC.
ipv6 dhcp snooping subscriber-id select
(sp|sv|pv|spv) delimiter WORD
(delimiter WORD |)
no ipv6 dhcp snooping subscriber-id
select delimiter
Configures user configuration options to
generate subscriber-id. The no command
restores to its original default configuration,
i.e. vlan name together with port name.
Port mode
ipv6 dhcp snooping remote-id
<remote-id>
no ipv6 dhcp snooping remote-id
This command is used to set the form of
adding option 37 in received DHCPv6
request packets, of which <remote-id> is
the content of remote-id in user-defined
option 37 and it is a string with a length of
less than 128. The no operation restores
remote-id in option 37 to
enterprise-number together with vlan MAC
address.
ipv6 dhcp snooping subscriber-id
<subscriber-id>
no ipv6 dhcp snooping subscriber-id
This command is used to set the form of
adding option 38 in received DHCPv6
request packets, of which <subscriber-id>
is the content of subscriber-id in
user-defined option 38 and it is a string with
a length of less than 128. The no operation
restores subscriber-id in option 38 to vlan
name together with port name such as
"Vlan2+Ethernet1/0/2".
2. DHCPv6 relay option basic functions configuration
Command Explanation
Global mode
ipv6 dhcp relay remote-id option
no ipv6 dhcp relay remote-id option
This command enables the switch relay to
support option 37 and the no form of this
command disables it.
ipv6 dhcp relay subscriber-id option
no ipv6 dhcp relay subscriber-id option
This command enables the switch relay to
support the option 38, the no form of this
command disables it.