PLANET XGS3-24042 User Manual

Page 568

Advertising
background image

61-12

PPPoE data

Version

Type

Code

Session ID

Length Field

TLV1

……

TLV N

TLV frame

Type

Length

Data

Each field meanings in the following:

Type field (2 bytes) of Ethernet II frame: The protocol sets type field value of PPPoE protocol packet as

0x8863 (include 5 kinds of packets in PPPoE discovery stage only), type field value of session stage as

0x8864.

PPPoE version field (4 bits): Specify the current PPPoE protocol version, the current version must be set as

0x1.

PPPoE type field (4 bits): Specify the protocol type, the current version must be set as 0x1.

PPPoE code field (1 byte): Specify the packet type. 0x09 means PADI packet, 0x07 means PADO packet,

0x19 means PADR packet, 0x65 means PADS packet, 0xa7 means PADT packet.

PPPoE session ID field (2 bytes): Specify the session ID.

PPPoE length field (2 bytes): Specify the sum of all TLV length.

TLV type field (2 bytes): A TLV frame means a TAG, type field means TAG type, the table is as follows.

TLV length field (2 bytes): Specify the length of TAG data field.

TLV data field (the length is not specified): Specify the transmitted data of TAG.

Tag Type

Tag Explanation

0x0000

The end of a series tag in PPPoE data field, it is saved for ensuring the version

compatibility and is applied by some packets.

0x0101

Service name. Indicate the supplied services by network.

0x0102

Server name. When user receives the PADO response packet of AC, it can

obtain the server name from the tag and select the corresponding server.

0x0103

Exclusive tag of the host. It is similar to tag field of PPPoE data packets and is

used to match the sending and reveiving end (Because broadcast network may

exist many PPPoE data packets synchronously).

0x0104

AC-Cookies. It is used to avoid the vicious DOS attack.

0x0105

The identifier of vendor.

0x0110

Relay session ID. PPPoE data packet can be interrupted to other AC, this field is

used to keep other connection.

0x0201

The error of service name. When the requested service name is not accepted by

other end, the response packet will take this tag.

0x0202

The error of server name.

0x0203

Common error.

Table 61-1 TAG value type of PPPoE

Advertising
This manual is related to the following products: