PLANET XGS3-24042 - Manual (Page 540)

54-2
am port
no am port
Enable/disable AM function on the port.
When the AM function is enabled on the
port, no IP or ARP message will be
forwarded by default.
3. Configure the forwarding IP
Command Explanation
Port Mode
am ip-pool <ip-address> <num>
no am ip-pool <ip-address> <num>
Configure the forwarding IP of the port.
4. Configure the forwarding MAC-IP
Command Explanation
Port Mode
am mac-ip-pool <mac-address>
<ip-address>
no am mac-ip-pool <mac-address>
<ip-address>
Configure the forwarding MAC-IP of the
port.
5. Delete all of the configured IP or MAC-IP or both
Command Explanation
Global Mode
no am all [ip-pool|mac-ip-pool]
Delete MAC-IP address pool or IP
address pool or both pools configured by
all users.
6. Display relative configuration information of AM
Command Explanation
Global Configuration Mode
show am [interface <interface-name>]
Display the AM configuration information
of one port or all ports.