PLANET XGS3-24042 - Manual (Page 338)

40-4
40.2 BGP Configuration Task List
The BGP configuration tasks include basic and advanced tasks. Basic BGP configuration tasks include the
following:
1． Enable BGP Routing (required)
2． Configure BGP Neighbors (required)
3． Administrate the change of routing policy
4． Configure BGP Weights
5． Configure BGP Route Filtering policy basing on Neighbors
6． Configure Next-Hop of BGP
7． Configure Multi-Hop of EGBP
8． Configure BGP Session Identifier
9． Configure BGP Version
Advanced BGP configuration tasks include the following:
1． Use Route Maps to Modify Route
2． Configure Route Aggregation
3． Configure BGP Community Filtering
4． Configure BGP Confederation
5． Configure a Route Reflector
6． Configure Peer Groups
7． Configure Neighbors and Peer Groups’ Parameters
8． Adjust BGP Timers
9． Adjust BGP Announcement Interval
10． Configure the default Local Priority
11． Allow to Transfer Default Route
12． Configure BGP’s MED Value
13． Configure BGP Routing Redistribution
14． Configure BGP Route Dampening
15． Configure BGP capability Negotiation
16． Configure Routing Server
17． Configure Path-Selected Rule
18． Configure redistribution of OSPF routing to BGP
(1) Enable redistribution of OSPF routing to BGP
(2) Display and debug the information about configuration of redistribution of OSPF routing to BGP
Ⅰ． Basic BGP configuration tasks
1. Enable BGP Routing
Command Explanation
Global mode
router bgp <as-id> Enable BGP, the “no router bgp