PLANET XGS3-24042 - Manual (Page 182)

20-19
access-group}
2. Configure a policy-map
Command Explanation
Global Mode
policy-map <policy-map-name>
no policy-map <policy-map-name>
Create a policy-map and enter policy-map
mode, no command deletes the specific
policy-map.
class <class-map-name> [insert-before
<class-map-name>]
no class <class-map-name>
Create a policy map to associate with a
class map and enter policy class map
mode, then different data streams can
apply different policies and be assigned a
new DSCP value. No command deletes
the specified policy class map.
set {ip dscp <new-dscp> | ip precedence
<new-precedence> | cos <new-cos> | c-vid
<new-c-vid> | s-vid <new-s-vid> | s-tpid
<new-s-tpid>}
no set {ip dscp | ip precedence | cos | c-vid
| s-vid | s-tpid}
Assign a new DSCP, CoS and IP
Precedence value for the classified flow,
no command cancels the operation.
Single bucket mode:
policy <bits_per_second>
<normal_burst_bytes> ({action ACTION} |
exceed-action drop | transmit})
Dual bucket mode:
policy <bits_per_second>
<normal_burst_bytes> [pir
<peak_rate_bps>] |
<maximum_burst_bytes> [{action ACTION
| violate-action drop | transmit}]
ACTION definition:
policied-cos-to-cos-transmit |
policied-cos-to-dscp-transmit |
policied-dscp-exp-to-cos-transmit |
policied-dscp-exp-to-dscp-transmit
no policy
Configure a policy for the classified flow.
The non-aggregation policy command
supports three colors. Analyze the working
mode of the token bucket, whether it is
single rate single bucket, single rate dual
bucket or dual rate dual bucket, set
corresponding action to different color
packets. The no command will delete the
configuration. Only specific switch
supports single bucket mode.
accounting
no accounting
Set statistic function for the classified flow.
After enable this function under the policy