PLANET XGS3-24042 - Manual (Page 24)

1-3
1.3 Product Features
 Physical Port
XGS3-24042
 24-Port 10/100/1000Base-T RJ-45 copper
 4 100/1000Base-X mini-GBIC/SFP slots, shared with Port-21 to Port-24.
 2 10GbE module slots, support up to 4 10G SFP+ transceivers
 1 RJ-45 serial console interface for Switch basic management and setup
XGS3-24242
 24 100/1000Base-X mini-GBIC/SFP slots
 12-Port 10/100/1000Base-T RJ-45 copper, shared with Port-13 to Port-24.
 2 10GbE module slots, support up to 4 10G SFP+ transceivers
 1 RJ-45 serial console interface for Switch basic management and setup
 IP Stacking
 IP stacking technology, connect with stack member via both Gigabit TP/SFP or 10G SFP+
interface
 Single IP address management, supports up to 24 units stacking together.
 IP Routing Features
 IP Routing protocol supports RIP v1/v2, OSPF v2/v3, BGP4/4+
 Routing interface provides Per-VLAN routing mode
 VRRP v1/v3 protocol for redundant routing deploy
 Supports route redistribution
 Multicast Routing Features
 Supports PIM-DM (Protocol Independent Multicast - Dense Mode), PIM-SM (Protocol Independent
Multicast - Sparse Mode) and PIM-SSM (Protocol Independent Multicast – Source Specific
Multicast)
 Supports DVMRP(Distance Vector Multicast Routing Protocol)
 Supports IGMP v1/v2/v3 and MLD v1/v2
 Layer 2 Features
 Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet
standard
 Supports Auto-negotiation and half duplex/full duplex modes for all 10Base-T/100Base-TX and
1000Base-T ports.
 Auto-MDI/MDI-X detection for each RJ-45 port
 Prevents packet loss with back pressure (Half-Duplex) and IEEE 802.3x PAUSE frame flow control
(Full-Duplex)
 High performance of Store-and-Forward architecture, broadcast storm control and runt/CRC
filtering eliminates erroneous packets to optimize the network bandwidth
 16K MAC address table, automatic source address learning and ageing
 Support VLAN