PLANET XGS3-24042 - Manual (Page 617)

70-3
1. Configure RSPAN VLAN
Command Explanation
VLAN Configuration Mode
remote-span
no remote-span
To configure the specified VLAN as
RSPAN VLAN. The no command will
remove the configuration of RSPAN
VLAN.
2. Configure mirror source port
Command Explanation
Global Mode
monitor session <session> source
{interface <interface-list> | cpu [slot
<slotnum>]} {rx| tx| both}
no monitor session <session> source
{interface <interface-list> | cpu [slot
<slotnum>]}
To configure mirror source port; The no
command deletes the mirror source port.
3. Configure mirror destination port
Command Explanation
Global Mode
monitor session <session> destination
interface <interface-number>
no monitor session <session> destination
interface <interface-number>
To configure mirror destination interface;
The no command deletes the mirror
destination port.
4. Configure reflector port
Command Explanation
Global Mode
monitor session <session> reflector-port
<interface-number>
no monitor session <session> reflector-port
To configure the interface to reflector
port; The no command deletes the
reflector port.
5. Configure remote VLAN of mirror group
Command Explanation
Global Mode
monitor session <session>
remote vlan <vid>
no monitor session <session> remote vlan
To configure remote VLAN of mirror
group, the no command deletes the
remote VLAN of mirror group.