PLANET XGS3-24042 - Manual (Page 242)

30-6
30.5 DHCPv6 Prefix Delegation Client Configuration
DHCPv6 prefix delegation client configuration task list as below:
1. To enable/disable DHCPv6 service
2. To enable DHCPv6 prefix delegation client function on port
1. To enable/disable DHCPv6 service
Command Explanation
Global Mode
service dhcpv6
no service dhcpv6
To enable DHCPv6 service.
2. To enable DHCPv6 prefix delegation client function on port
Command Explanation
Interface Configuration Mode
ipv6 dhcp client pd <prefix-name>
[rapid-commit]
no ipv6 dhcp client pd
To enable client prefix delegation request
function on specified port, and the prefix
obtained associate with universal prefix
configured.
30.6 DHCPv6 Configuration Examples
Example1:
When deploying IPv6 networking, XGS3 series switches can be configured as DHCPv6 server in order to
manage the allocation of IPv6 addresses. Both the state and the stateless DHCPv6 are supported.
Topology:
The access layer use Switch1 switch to connect users of dormitory buildings; Switch2 is configured as
DHCPv6 relay delegation in primary aggregation layer; Switch3 is configured as DHCPv6 server in secondary
aggregation layer, and connected with backbone network or higher aggregation layers; The Windows Vista
which be provided with DHCPv6 client must load on PC.