PLANET XGS3-24042 - Manual (Page 172)

18-9
drop
no drop
transmit
no transmit
Drop or transmit the traffic that match
the class, the no command cancels the
assigned action.
3. Apply QoS to port or VLAN interface
Command Explanation
Interface Configuration Mode
mls qos trust {cos | dscp}
no mls qos trust {cos | dscp}
Configure port trust; the no command
disables the current trust status of the
port.
mls qos cos {<default-cos>}
no mls qos cos
Configure the default CoS value of the
port; the no command restores the
default setting.
service-policy input <policy-map-name>
no service-policy input <policy-map-name>
Apply a policy map to the specified port;
the no command deletes the specified
policy map applied to the port. Egress
policy map is not supported yet.
Global Mode
service-policy input <policy-map-name> vlan
<vlan-list>
no service-policy input <policy-map-name>
vlan <vlan-list>
Apply a policy map to the specified
VLAN interface; the no command
deletes the specified policy map applied
to the VLAN interface.
4. Configure queue management algorithm and weight
Command Explanation
Port Configuration Mode
mls qos queue algorithm {sp | wdrr}
no mls qos queue algorithm
Set queue management algorithm, the
default queue management algorithm is
wdrr.
Global Mode
mls qos queue wdrr weight
<weight0..weight7>
no mls qos queue wdrr weight
Set wdrr queue weight for all ports
globally, the default queue weight is 1 1 1
1 1 1 1 1.
5. Configure QoS mapping
Command Explanation
Global Mode