PLANET XGS3-24042 - Manual (Page 240)

30-4
Command Explanation
Interface Configuration Mode
ipv6 dhcp relay destination
{[<ipv6-address>] [interface
{ <interface-name> | vlan <1-4096>}]}
no ipv6 dhcp relay destination
{[<ipv6-address>] [interface
{ <interface-name> | vlan <1-4096>}]}
To specify the destination address of
DHCPv6 relay transmit; The no form of
this command delete the configuration.
30.4 DHCPv6 Prefix Delegation Server Configuration
DHCPv6 prefix delegation server configuration task list as below:
1. To enable/delete DHCPv6 service
2. To configure prefix delegation pool
3. To configure DHCPv6 address pool
（1） To achieve/delete DHCPv6 address pool
（2） To configure prefix delegation pool used by DHCPv6 address pool
（3） To configure static prefix delegation binding
（4） To configure other parameters of DHCPv6 address pool
4. To enable DHCPv6 prefix delegation server function on port
1. To enable/delete DHCPv6 service
Command Explanation
Global Mode
service dhcpv6
no service dhcpv6
To enable DHCPv6 service.
2. To configure prefix delegation pool
Command Explanation
Global Mode
ipv6 local pool <poolname>
<prefix|prefix-length>
<assigned-length>
no ipv6 local pool <poolname>
To configure prefix delegation pool.
3. To configure DHCPv6 address pool
（1）To achieve/delete DHCPv6 address pool
Command Explanation
Global Mode