PLANET XGS3-24042 - Manual (Page 625)

Chapter 62 ULSM Configuration
71-4
71.4 sFlow Troubleshooting
In configuring and using sFlow, the sFlow server may fail to run properly due to physical connection failure,
wrong configuration, etc. The user should ensure the following:
 Ensure the physical connection is correct
 Guarantee the address of the sFlow analyzer configured under global or port mode is accessible.
 If traffic sampling is required, the sampling rate of the interface must be configured
 If statistic sampling is required, the statistic sampling interval of the interface must be configured
If the examination remains unsolved, please contact with the technical service center of our company.