PLANET XGS3-24042 - Manual (Page 348)

40-14
14． Configure Route Dampening
Command Explanation
BGP configuration mode
bgp dampening [<1-45>] [<1-20000>
<1-20000> <1-255>] [<1-45>]
no bgp dampening
Enable BGP route dampening and apply the
specified parameters; the no bgp
dampening command stops route
dampening
15． Configure BGP capability Negotiation
Command Explanation
BGP configuration mode
neighbor {<ip-address>|<TAG>}
capability {dynamic | route-refresh}
no neighbor {<ip-address>|<TAG>}
capability {dynamic | route-refresh}
neighbor {<ip-address>|<TAG>}
capability orf prefix-list
{<both>|<send>|<receive>}
no neighbor {<ip-address>|<TAG>}
capability orf prefix-list
{<both>|<send>|<receive>}
neighbor {<ip-address>|<TAG>}
dont-capability-negotiate
no neighbor {<ip-address>|<TAG>}
dont-capability-negotiate
neighbor {<ip-address>|<TAG>}
override-capability
no neighbor {<ip-address>|<TAG>}
override-capability
neighbor {<ip-address>|<TAG>}
strict-capability-match
no neighbor {<ip-address>|<TAG>}
strict-capability-match
BGP provides capability negotiation
regulation and carry out this capability match
while establishing connection. The currently
supported capabilities include route update,
dynamic capability, outgoing route filtering
capability and the address family’s capability
of supporting the negotiation. Use these
command to enable these capabilities, its
format “no” close these capabilities .It can
also be configured by commands to not do
capability negotiation, do strict capability
negotiation or not care about the negotiation
results.
16． Configure Routing Server
Command Explanation
BGP configuration mode
neighbor {<ip-address>|<TAG>} Route server may configure BGP neighbors