Yaskawa JAPMC-MC2300 - Manual (Page 31)

2.2 Applicable Machine Controllers for SVA-01 Modules
2-5
2
Settings and Installation
* 1. One of the CPU modules indicated below is required.
* 2. Inter-rack connection module EXIOIF (Model: JAPMC-EX2200) is required between racks.
Œ
SVA-01 modules cannot be mounted on the following MP2000-series Machine Controllers:
MP2100, MP2400, MP2500, MP2500M, MP2500B, MP2500MB
MP2500B-OP JEPMC-MP250U
14 modules
Ver. 2.20
or later Ver. 6.10
or later
To install an optional module, use the
following procedure.
The procedures differ if connecting one
module or several modules.
„ For one module
Mount an optional module on
MP2500B-OP or an MP2500MB-OP
controller directly.
„ For several modules
1. Mount an inter-rack connection
module EXIOIF (Model: JAPMC-
EX2200) on an MP2500B-OP or an
MP2500MB-OP controller.
2. Mount an optional module on an
expansion rack (MP2200 base unit).
3. Mount an inter-rack connection
module EXIOIF (Model: JAPMC-
EX2200) on the expansion rack.
4. Connect the expansion rack to the
MP2500B-OP or the MP2500MB-
OP controller.
ΠThe maximum number of optional
modules is the total number that
can be used with three racks
(maximum number of racks).
MP2500MB-OP JEPMC-MP254U
(cont’d)
Name Model
Max. Number
of SVA-01
Modules that
Can Be
Connected
Applicable
CPU
Version
Applicable
MPE720
Version
Remarks
Name Model Remarks
CPU-01 JAPMC-CP2200 –
CPU-02 JAPMC-CP2210 Equipped with one CF card slot and one USB port
CPU-03 JAPMC-CP2220-E Equipped with one CF card slot and one Ethernet port.
CPU-04 JAPMC-CP2230-E Equipped with one Ethernet port.