Yaskawa JAPMC-MC2300 User Manual
Page 327
12.2 Troubleshooting System Errors
12.2.1 Outline of System Errors
12-8
[ b ] Displaying a Register List with the Quick Reference (MPE720 Version 5.
)
Register lists can also be accessed with the Quick Reference.
1.
Select View
−
Quick Reference from the MPE720 Engineering Manager Window.
The Quick Reference will be displayed at the bottom of the Engineering Manager Window.
Refer to 3.2.2 Opening the Module Configuration Window on page 3-4
for details on how to display the Engi-
neering Manager Window.
2.
Click the Register List Tab to switch to the register list.
3.
Enter the register number of the first system register to be accessed for Register, input the register
number of the last system register to be accessed for D, and click anywhere in the list. The contents of
the specified range of register numbers will be displayed.
[ c ] Register List Display Procedure (MPE720 Version 6.
)
Use the following procedure to display the register list.
1.
Open the Register List Subwindow on MPE720 version 6.
.
The Register List Tab will appear by default on the bottom of the subwindow.
2.
Enter the first register number SW
of the system registers to be accessed in the Register
input field. The contents of system registers from the first register number will be displayed.
The data type is set by default to decimal. To display data in hexadecimal as shown above, right-click any-
where in the list and select Hexadecimal from the pop-up menu that opens.