Yaskawa JAPMC-MC2300 - Manual (Page 62)

4.1 SVA-01 Module Operation Mode Selection
4-2
4.1 SVA-01 Module Operation Mode Selection
With the SVA-01, one of the following three operation modes can be selected.
• Normal Operation Mode
• Simulation Mode
• General I/O Mode
Select an operation mode by setting the fixed parameter No. 0 (Selection of Operation Modes) in the Fixed Parameter
Tab Page of SVA Definition Window.
Refer to 3.3.1 Opening the SVA Definition Window on page 3-7 for information on how to open the SVA Definition
Window.
Fixed Parameter Name Setting Default Setting
No. 0
Selection of Operation
Modes
0: Normal operation mode
1: Axis unused
2: Simulation mode
4: General-purpose I/O mode
5: System reserved mode 1
6: System reserved mode 2
1: Axis unused