Execute_write_data_ready(), Axi3 bfm, Axi4 example – Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM User Manual
Page 115
SystemVerilog AXI3 and AXI4 Slave BFMs
execute_write_data_ready()
Mentor VIP AE AXI3/4 User Guide, V10.2b
97
September 2013
execute_write_data_ready()
This AXI4 task executes a write data ready by placing the ready argument value onto the
WREADY signal. It will block for one ACLK period.
AXI3 BFM
Note
The execute_write_data_ready() task is not available in the AXI3 BFM. Use the
task along with the transaction record data_ready_delay field.
AXI4 Example
// Assert and deassert the WREADY signal
forever begin
bfm.execute_write_data_ready(1'b0);
bfm.wait_on(AXI4_CLOCK_POSEDGE);
bfm.wait_on(AXI4_CLOCK_POSEDGE);
bfm.execute_write_data_ready(1'b1);
bfm.wait_on(AXI4_CLOCK_POSEDGE);
end
Prototype
task automatic execute_write_data_ready
(
bit ready
);
Arguments
ready
The value to be placed onto the WREADY signal
Returns
None