Running the qsys tool – Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM User Manual
Page 676
Mentor VIP AE AXI3/4 User Guide, V10.2b
656
Getting Started with Qsys and the BFMs
Setting Up Simulation from the Windows GUI
September 2013
Running the Qsys Tool
1. Open Qsys in the Quartus II software menu.
Start the Quartus II software. When the Quartus II GUI appears, select Tools>Qsys
(refer to
).
Figure 12-3. Select Qsys from the Quartus II Software Top-Level Menu
2. From the Qsys open window, use the File>Open command to open and select the file
ex1_back_to_back_sv. On a Windows platform, this Qsys file is in the directory
axi3-qsys-examples/ex1_back_to_back_sv (refer to
this file is in the directory axi3-qsys-examples/ex1_back_to_back_sv. Select and open
the ex1_back_to_back_sv.qsys example.
Figure 12-4. Open the ex1_back_to_back_sv.qsys Example
Note
If you open the Qsys tool in a subsequent session, a Qsys dialog asks you if you want to
open this file.