Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 423)

VHDL AXI3 and AXI4 Slave BFMs
get_gen_write_strobes()
Mentor VIP AE AXI3/4 User Guide, V10.2b 403
September 2013
get_gen_write_strobes()
This nonblocking procedure gets the gen_write_strobes field for a write transaction that is
uniquely identified by the transaction_id field previously created by the
create_slave_transaction() procedure.
AXI3 Example
-- Create a slave transaction. Creation returns tr_id to identify the
transaction.
create_slave_transaction(tr_id, bfm_index, axi_tr_if_0(bfm_index));
....
-- Get the auto correction write strobes flag of the tr_id transaction.
get_gen_write_strobes(write_strobes_flag, tr_id, bfm_index,
axi_tr_if_0(bfm_index));
Prototype -- * = axi| axi4
-- ** = AXI | AXI4
get_gen_write_strobes
(
gen_write_strobes: out integer;
transaction_id : in integer;
bfm_id : in integer;
path_id : in *_path_t; --optional
signal tr_if : inout *_vhd_if_struct_t
);
Arguments gen_write_strobes Correct write strobes flag:
0 = write_strobes passed through to protocol signals.
1 = write_strobes auto-corrected for invalid byte lanes.
transaction_id Transaction identifier. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
bfm_id BFM identifier. Refer to “Overloaded Procedure Common Arguments”
on page 203 for more details.
path_id (Optional) Parallel process path identifier:
**_PATH_0
**_PATH_1
**_PATH_2
**_PATH_3
**_PATH_4
Refer to “Overloaded Procedure Common Arguments” on page 203 for
more details.
tr_if Transaction signal interface. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
Returns gen_write_strobes