Set_config(), Command as the following example illustrates – Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM User Manual
Page 128
Mentor VIP AE AXI3/4 User Guide, V10.2b
110
SystemVerilog AXI3 and AXI4 Monitor BFMs
set_config()
September 2013
set_config()
This function sets the configuration of the monitor BFM
Prototype
// * = axi | axi4
function void set_config
(
input *_config_e config_name,
input *_max_bits_t config_val
);
Arguments
config_name
(AXI3) Configuration name:
AXI_CONFIG_SETUP_TIME
AXI_CONFIG_HOLD_TIME
AXI_CONFIG_MAX_TRANSACTION_TIME_FACTOR
AXI_CONFIG_TIMEOUT_MAX_DATA_TRANSFER
AXI_CONFIG_BURST_TIMEOUT_FACTOR
AXI_CONFIG_WRITE_CTRL_TO_DATA_MINTIME
AXI_CONFIG_MASTER_WRITE_DELAY
AXI_CONFIG_MASTER_DEFAULT_UNDER_RESET
AXI_CONFIG_SLAVE_DEFAULT_UNDER_RESET
AXI_CONFIG_ENABLE_ALL_ASSERTIONS
AXI_CONFIG_ENABLE_ASSERTION
AXI_CONFIG_MAX_LATENCY_AWVALID_ASSERTION_
TO_AWREADY
AXI_CONFIG_MAX_LATENCY_ARVALID_ASSERTION_
TO_ARREADY
AXI_CONFIG_MAX_LATENCY_RVALID_ASSERTION_
TO_RREADY
AXI_CONFIG_MAX_LATENCY_BVALID_ASSERTION_
TO_BREADY
AXI_CONFIG_MAX_LATENCY_WVALID_ASSERTION_
TO_WREADY
AXI_CONFIG_READ_DATA_REORDERING_DEPTH
AXI_CONFIG_SLAVE_START_ADDR
AXI_CONFIG_SLAVE_END_ADDR
AXI_CONFIG_MASTER_ERROR_POSITION
AXI_CONFIG_SUPPORT_EXCLUSIVE_ACCESS
(AXI4) Configuration name:
AXI4_CONFIG_SETUP_TIME
AXI4_CONFIG_HOLD_TIME
AXI4_CONFIG_BURST_TIMEOUT_FACTOR
AXI4_CONFIG_MAX_TRANSACTION_TIME_FACTOR
AXI4_CONFIG_ENABLE_RLAST
AXI4_CONFIG_ENABLE_SLAVE_EXCLUSIVE
AXI4_CONFIG_ENABLE_ALL_ASSERTIONS
AXI4_CONFIG_ENABLE_ASSERTION
AXI4_CONFIG_MAX_LATENCY_AWVALID_ASSERTION_
TO_AWREADY
AXI4_CONFIG_MAX_LATENCY_ARVALID_ASSERTION_
TO_ARREADY
AXI4_CONFIG_MAX_LATENCY_RVALID_ASSERTION_
TO_RREADY
AXI4_CONFIG_MAX_LATENCY_BVALID_ASSERTION_
TO_BREADY
AXI4_CONFIG_MAX_LATENCY_WVALID_ASSERTION_
TO_WREADY
AXI4_CONFIG_ENABLE_QOS
AXI4_CONFIG_READ_DATA_REORDERING_DEPTH
AXI4_CONFIG_SLAVE_START_ADDR
AXI4_CONFIG_SLAVE_END_ADDR
config_val