Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 279)

VHDL AXI3 and AXI4 Master BFMs
set_resp()
Mentor VIP AE AXI3/4 User Guide, V10.2b 261
September 2013
set_resp()
This nonblocking procedure sets a response resp field array element for a transaction that is
uniquely identified by the transaction_id field previously created by either the
create_write_transaction() or create_read_transaction() procedure.
Note
You would not normally use this procedure in a master test program.
Prototype -- * = axi| axi4
-- ** = AXI | AXI4
set_resp
(
resp: in std_logic_vector (**_MAX_BIT_SIZE-1 downto 0) |
integer;
index : in integer; --optional
transaction_id : in integer;
bfm_id : in integer;
path_id : in *_path_t; --optional
signal tr_if : inout *_vhd_if_struct_t
);
Arguments resp Transaction response array:
**_OKAY = 0;
**_EXOKAY = 1;
**_SLVERR = 2;
**_DECERR = 3;
index (Optional) Array element index number for resp.
transaction_id Transaction identifier. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
bfm_id BFM identifier. Refer to “Overloaded Procedure Common Arguments”
on page 203 for more details.
path_id (Optional) Parallel process path identifier:
**_PATH_0
**_PATH_1
**_PATH_2
**_PATH_3
**_PATH_4
Refer to “Overloaded Procedure Common Arguments” on page 203 for
more details.
tr_if Transaction signal interface. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
Returns None