Get_read_addr_ready(), Axi3 bfm, Axi4 example – Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM User Manual
Page 78
Advertising
Mentor VIP AE AXI3/4 User Guide, V10.2b
60
SystemVerilog AXI3 and AXI4 Master BFMs
get_read_addr_ready()
September 2013
get_read_addr_ready()
This blocking AXI4 task returns the value of the read address channel ARREADY signal using
the ready argument. It will block for one ACLK period.
AXI3 BFM
Note
The get_read_addr_ready() task is not available in the AXI3 BFM.
AXI4 Example
// Get the ARREADY signal value
bfm.get_read_addr_ready(ready);
Prototype
task automatic get_read_addr_ready
(
output bit ready
);
Arguments
ready
The value of the ARREADY signal.
Returns
ready
Advertising