Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 125)

SystemVerilog AXI3 and AXI4 Monitor BFMs
Monitor BFM Configuration
Mentor VIP AE AXI3/4 User Guide, V10.2b 107
September 2013
1.
Refer to Monitor Timing and Events for details of simulator time-steps.
Slave Attributes
**_CONFIG_SUPPORT_EXCLUSIVE_ACCESS Configures the support for an exclusive
slave. If enabled the BFM will expect an
EXOKAY response to a successful
exclusive transaction. If disabled the BFM
will expect an OKAY response to an
exclusive transaction. Refer to the AMBA
AXI protocol specification for more details.
0 = disabled
1 = enabled (default)
AXI_CONFIG_SLAVE_DEFAULT_UNDER_RESET (AXI3) The slave BFM drives the BVALID
and RVALID signals low during reset.
Refer to the AMBA AXI Protocol
specification for more details.
0 = false (default)
1 = true
**_CONFIG_SLAVE_START_ADDR Configures the start address map for the
slave.
**_CONFIG_SLAVE_END_ADDR Configures the end address map for the
slave.
**_CONFIG_READ_DATA_REORDERING_DEPTH The slave read reordering depth. Refer to
the AMBA AXI Protocol specification for
more details. Default: 1.
Error Detection
**_CONFIG_ENABLE_ALL_ASSERTIONS Global enable/disable of all assertion
checks in the BFM.
0 = disabled
1 = enabled (default)
**_CONFIG_ENABLE_ASSERTION Individual enable/disable of assertion
check in the BFM.
0 = disabled
1 = enabled (default)
Table 5-2. AXI Monitor BFM Configuration (cont.)